|
|
 |
 |
 |
 |
 |
 |
 |
 |
| |
|
| Smart Grid AMI (Advanced Metering) Solutions |
| |
|
Billion SG5041
Broadband PLC Medium Voltage Head End
The Billion SG5041 is a broadband PLC communication unit, which connects and transfers data over the electric grid from the backbone to the customer’s endpoints. medium voltage (MV) grids to low voltage (LV) grids. The Billion MV Head End can serve as a back haul channel responsible for collecting and transmitting all data signals to and from the MV repeater or slave node. The Billion SG5041 enables multiple broadband power line applications such as Smart Grid, power outage notification, dynamic routing and intelligent repetition, SCADA extension, and surveillance over the medium voltage grid, as well as additional future services including Internet, telephony, security alarm, intelligent home control, and video services.
- 200Mbps physical connection bandwidth
- 10/100 Ethernet x2
- RS485/RS232 interface (optional)
- AC power: 90-250VAC, 50/60Hz
- Traffic control and isolation: VLAN/OVLAN
- 802.1D bridging protocol
- DES and 3DES encryption
- QoS with 8 level priority queues
- 802.1P traffic priority classification
- Power mask management
- SNMP and web network management protocol
- Configurable bandwidth from 2 to 30MHz
- Configurable spectral location from 2 to 34 MHz
- Up to 1536 carriers for better noise immunity
- IP67 compliant rugged design for high level of protection against dust and water
- Dimension: 270 x 250 x 78 mm
- Unit net weight: 2.3 kg
More Details >>
|
|
|
|
Billion SG5031
Broadband PLC Medium Voltage Repeater
The Billion SG5031 is a broadband PLC communication unit, which connects and transfers data over the electric grid from the backbone to the customer’s endpoints. It bridges medium voltage (MV) grids to low voltage (LV) grids. The Billion SG5031 MV repeater can serve as a back haul channel responsible for collecting and transmitting all data signals to and from the SG5041 MV Head End located in the utilities control center. The Billion SG5031 enables multiple broadband power line applications such as Smart Grid, power outage notification, dynamic routing and intelligent repetition, SCADA extension, and surveillance over the medium voltage grid, as well as additional future services including Internet, telephony, security alarm, intelligent home control, and video services.
- 200Mbps physical connection bandwidth
- 10/100 Ethernet x2
- RS485/RS232 interface (optional)
- AC power: 90-250VAC, 50/60Hz
- Traffic control and isolation: VLAN/OVLAN
- 802.1D bridging protocol
- DES and 3DES encryption
- QoS with 8 level priority queues
- 802.1P traffic priority classification
- Power mask management
- SNMP and web network management protocol
- Configurable bandwidth from 2 to 30MHz
- Configurable spectral location from 2 to 34 MHz
- Up to 1536 carriers for better noise immunity
- IP67 compliant rugged design for high level of protection against dust and water
- Dimension: 270 x 250 x 78 mm
- Unit net weight: 2.3 kg
More Details >>
|
|
|
|
Billion SG5011 R2
Broadband PLC AMI Low Voltage Concentrator
The Billion SG5011 R2 is a broadband PLC communication unit, which connects and transfers data over the electric grid from the backbone to the customer’s endpoints. It bridges medium voltage (MV) grids to low voltage (LV) grids. The Billion SG5011 R2 LV concentrator can serve as a back haul channel responsible for collecting and transmitting all data signals to and from the MV head-end device located in the utilities control center. The Billion SG5011 R2 enables multiple broadband power line applications such as Smart Grid, power outage notification, dynamic routing and intelligent repetition, SCADA extension, and surveillance over the MV grid, as well as additional future services including Internet, telephony, security alarm, intelligent home control, and video services.
- 44Mbps physical connection bandwidth
- 10/100 Ethernet x2
- RS485/RS232 interface (optional)
- AC power: 90-250VAC, 50/60Hz
- 802.1D bridging protocol
- Up to 1024 MACs table size
- DES and 3DES encryption
- 802.1P traffic priority classification
- Power mask management
- SNMP and web network management protocol
- Up to 1536 carriers for better noise immunity
- IP67 compliant rugged design for high level of protection against dust and water
- Dimension: 270 x 250 x 78 mm
- Unit net weight: 2.3 kg
More Details >>
|
|
|
|
Billion SG5001 R2
Broadband PLC AMI Low Voltage End Point
The Billion SG5001 R2 is a standalone end-point device which can be connected with a smart meter by using RS485 or RS232. It enables Advanced Metering Infrastructure (AMI) services for meters with serial interfaces. This broadband PLC communication CPE has a state-of-the-art broadband PLC chipset. It can offer robust and broadband network communication over the electricity grid, integrating the existing metering systems with an intelligent IP-based network. It can interface the meter either directly or via a collector, supporting real-time remote control as well as Smart Grid applications including power outage notification and alarm information, load management, historical data and readings every minute, remote monitoring of the grid network, real-time consumption and tariff data to customers, and remote connect / disconnect, etc.
- Standalone device
- 44Mbps physical connection bandwidth
- 10 / 100 Ethernet x 1
- RS485 / RS232 interface
- AC power: 90-250VAC, 50/60Hz
- LED status indicator
- Automatic repeating and Ad-Hoc networking
- Automatic re-configuration
- PnP installation
- DES, 3DES, 128-bit and 256-bit AES
- Up to 15 direct PLC connection
- 802.1P traffic priority classification
- Power mask management
- SNMP and web network management protocol
- Up to 1536 carriers for better noise immunity
- Dimension: 180×120×45 mm
- Unit Net weight: 300 g
More Details >>
|
|
|
 |
Billion SG5000
Smart Grid AMI PLC Module
The Billion SG5000 is a broadband PLC communication module which is embedded in a smart meter. It enables Advanced Metering Infrastructure (AMI) services for meters with serial interfaces. This embedded BPL communication module has a state-of-the-art BPL chipset with 200Mbps. It can offer robust and broadband network communication over the electricity grid, integrating the existing metering systems with an intelligent IP-based network. It can interface the meter either directly or via a collector, supporting real-time remote control as well as Smart Grid applications including power outage notification and alarm information, load management, historical data and readings every minute, remote monitoring of the grid network, real-time consumption and tariff data to customers, and remote connect / disconnect, etc.
- Daughter board
- 44Mbps physical connection bandwidth
- 10 / 100 Ethernet (optional)
- TTL UART interface
- DC power: DC 12~18V
- On board LED status indicator
- Automatic repeating and Ad-Hoc networking
- Automatic re-configuration
- PnP installation
- DES, 3DES, 128-bit and 256-bit AES
- Up to 16 direct PLC connection
- 802.1P traffic priority classification
- Power mask management
- SNMP and web network management protocol
- Up to 1536 carriers for better noise immunity
- FCC part 15, class A certification
- Dimension: 70 x 50 x 25 mm
More Details >>
|
|
|
|
|
| |
|
| In-building BPL Access Solutions |
| |
 |
BiPAC 2300 R2
BPL Access Head-End Unit
Connects and transfers data over the electric grid from the backhaul to the customer’s endpoints
BiPAC 2300 BPL Access Head-End Unit provides a cost-effective means of delivering broadband to a large group of users within one building. The BiPAC 2300 R2 Gateway allows for easy installations in neighborhoods, single and multi-dwelling units (MDUs) where the Head-End Unit acts as a head-end unit, extending an existing internet connection (Fiber, ADSL, Satellite, etc.) over a power line, depending on the customer’s requirements and infrastructure. The Head-End can automatically deliver the broadband connection throughout the whole building via the electrical wiring. It works in even the hardest-to-reach building environment, and enables service providers to quickly and easily bring high-speed broadband access to business and residential customers in multi-dwelling units (MDUs) or multi-tenant buildings. The Head-End Unit allows users to extend an internet connection to a powerline or cable network within an MDU, without the need for installing new wiring. End users can connect their Ethernet enabled devices such as PC’s, VoIP phones, Media Centers, etc., using the BiPAC 2104 to create a link to the internet.
- 200Mbps physical connection bandwidth
- 10/100 Mbps Ethernet ports x2
- AC power: 90-250VAC, 50/60Hz
- Ability to configure as a head-end master or a repeater
- Traffic control and isolation: VLAN/OVLAN
- 802.1D bridging protocol
- Up to 1024 MAC table size for multiple devices
- Up to 32 direct PLC connections
- DES and 3DES encryption
- QoS with 8 level priority queues
- 802.1P traffic priority classification
- Bandwidth limitation for each CPE
- Power mask management
- SNMP and web network management protocol
- Configurable bandwidth from 2 to 34MHz
More Details >>
|
|
|
 |
BiPAC 2200
Broadband PLC Repeater Modem
BiPAC 2200 is a broadband PLC communication repeater, which connects and transfers data over the electric grid from the backbone to the customer’s endpoints. BiPAC 2200 PLC repeater can serve as a back haul channel responsible for collecting and transmitting all data signals to and from BiPAC 2300 R2 Head End located in the Data center. BiPAC 2200 enables multiple broadband power line applications such as Smart Grid, power outage notification, dynamic routing and intelligent repetition, SCADA extension, and surveillance over the power grid, as well as additional future services including Internet, telephony, security alarm, intelligent home control, and video services.
- 200Mbps physical connection bandwidth
- 10/100 Ethernet x2
- RS485/RS232 interface (optional)
- AC power: 90-250VAC, 50/60Hz
- Traffic control and isolation: VLAN/OVLAN
- 802.1D bridging protocol
- DES and 3DES encryption
- QoS with 8 level priority queues
- 802.1P traffic priority classification
- Power mask management
- SNMP and web GUI network management protocol
- Configurable spectral location from 2 to 34 MHz
- Up to 1536 carriers for better noise immunity
- IP67 compliant rugged design for high level of protection against dust and water
More Details >>
|
|
|
 |
BiPAC 2100
Broadband PLC End-Point Modem
BiPAC 2100 is a broadband PLC communication end-point, which connects and transfers data over the electric grid from the backbone to the customer’s endpoints. The BiPAC 2100 PLC end-point can serve as a back haul channel responsible for collecting and transmitting all data signals to and from BiPAC 2300 R2 Head End located in the Data center directly or BiPAC 2200 repeater located in middle of power grid. Billion BiPAC 2100 enables multiple broadband power line applications such as Smart Grid, power outage notification, dynamic routing and intelligent repetition, SCADA extension, and surveillance over the power grid, as well as additional future services including Internet, telephony, security alarm, intelligent home control, and video services.
- 200Mbps physical connection bandwidth
- 10/100 Ethernet x1
- RS485/RS232 interface (optional)
- AC power: 90-250VAC, 50/60Hz
- Traffic control and isolation: VLAN/OVLAN
- 802.1D bridging protocol
- DES and 3DES encryption
- QoS with 8 level priority queues
- 802.1P traffic priority classification
- Power mask management
- SNMP and web GUI network management protocol
- Configurable spectral location from 2 to 34 MHz
- Up to 1536 carriers for better noise immunity
More Details >>
|
|
|
 |
BiPAC 2104
BPL Access End-Point Unit with Noise-filtering Power Socket
Transform your home power cables into a high-speed computer network
BPL solution is a low-cost, scalable, secure system that integrates broadband networking to deliver high-speed data over existing power lines. It allows users to create a high-speed local area network, without the need for new cabling. By installation of a BPL Head-End Unit, it enables Internet connection through existing power line cable. Users can simply connect the BPL Access End-Point Unit to any electrical socket in their home or office to create a link to the power line network.
- AC Pass-through power socket with noise-filtering function
- Plugs into a standard AC power outlet to receive Internet signal
- Performs Power line to Ethernet conversion
- Ethernet output connects to a computer or supplies broadband input to a home networking router or gateway
- Maps Ethernet QoS to Power line QoS using VLAN priority Bandwidth management for service class differentiation
More Details >>
|
|
|
 |
BiPAC 2103
BPL Access End-Point Unit
Transform your home power cables into a high-speed computer network
BPL solution is a low-cost, scalable, secure system that integrates broadband networking to deliver high-speed data over existing power lines. It allows users to create a high-speed local area network, without the need for new cabling. By installation of a BPL Head-end Unit, it enables Internet connection through existing power line cable. Users can simply connect the Billion BiPAC 2103 BPL Access End-Point Unit to any electrical socket in their home or office to create a link to the power line network.
- Plugs into a standard AC power outlet to receive Internet signal
- Performs Power line to Ethernet conversion
- Ethernet output connects to a computer or supplies broadband input to a home networking router or gateway
- QoS supported
- Bandwidth management for service class differentiation
More Details >>
|
|
|
|
|
| |
|
| In-home Broadband PLC Solutions |
| |
 |
Billion SG2097
Smart Energy PLC Adapter
Conscious of the need to reduce our carbon footprint, efficient energy management is a critical trend nowadays.
Start to conserve our planet by efficiently using your in-home electrical appliances. It deploys powerline
technology that utilizes in-home power line loops for network communications. No need to drill into the wall or for
any extra wires! This unique device with powerline technology, providing 200Mbps peak PHY rate, effectively
supports HDTV applications. The last but not the least, it features power metering and remote switch functions to
enable home users to efficiently and effectively manage in-home power consumption.
- Enables high-speed data transfer rate up to 200Mbps via in-house electrical wiring
- Includes one AC Pass-through power socket with noise-filtering function
- Built-in power meter for effectively reducing home appliance power usage
- Smart power switch for remotely home appliances power control
- Smart Power Saving technology for improved power efficiency
- Smart Route delivering the best transmission path
- Smart Repeater for increased connection coverage
- Utilizes Quality of Service control
- Supports Triple Play applications
- 1 x 10 / 100 Base-T Ethernet port
More Details >>
|
|
|
 |
Billion SG2095
Broadband PLC Ethernet Adapter with Remote Power On / Off Control
Conscious of the need to reduce our carbon footprint, efficient energy management is a critical trend nowadays. Start to conserve our planet by efficiently using your in-home electrical appliances. The Billion SG2095 embedded with the latest DS2-based powerline technology, is an ideal home networking solution delivering efficient energy management. It deploys Powerline technology that utilizes in-home power line loops for network communications. No need to drill into the wall or for any extra wires! This unique device with Powerline technology, providing 200Mbps peak PHY rate, effectively supports HDTV applications. A special feature of the built-in noise-filtering power socket is the ability to switch on and off in-home electrical appliances that are plugged in via Internet access.
- Provides high-speed data transfer of up to 200Mbps via electrical wiring
- Enables data transmission through existing home power grid
- Built-in Smart AC power switch control to remotely control the electrical home appliances such as laundry machine and air conditioner
- Smart power saving technology for improved power efficiency
- Utilizes Quality of Service control
- Supports Triple Play applications such as IPTV, VoIP and high-speed Internet access
- Supports 10/100 BaseT Ethernet
- Compliant with the UPA Alliance industry specifications
- Utmost slim and light design
More Details >>
|
|
|
|
|
| |
|
| ZigBee for HAN (Home Area Network) Energy Management |
| |
 |
Billion SG6200NXL
3G Wireless-N Smart Energy Gateway
The Billion SG6200NXL is an all-in-one router designed for users to enjoy real-time power management and secured wireless Internet access. Integrated with ZigBee technology, the Billion SG6200NXL can communicate with ZigBee-based HAN (Home Area Network) devices such as smart meters, IHD (In-home display) devices, load-control devices, and PCT (Programmable Communicating Thermostat) devices. By Internet access, the users can remotely monitor energy consumption and manage event control on appliances that connect to Billion SG3010 Compact Smart Energy Meter.
- ZigBee for reliable and flexible RF network
- Remote power monitoring and management with ZigBee meter
- Dual WAN interfaces for EWAN and 3.5G / 3.75G connections
- 802.11n Wireless AP
- High-speed wireless connection up to 300 Mbps data rate
- Wireless security supports WPA/WPA2 and WPS
- 2 x USB 2.0 ports to support 3G network and multiple functions
- Supports multiple SSIDs for flexibility of network infrastructure
- Quality of Service for traffic prioritization and bandwidth management
- Auto fail-over for always-on connection
- SOHO firewall security with DoS prevention and SPI
- Parental control with URL content filtering and packet filtering
- Dynamic Domain Name System (DDNS)
- Easy to Use with quick installation wizard
- 3G Management Center tool
- Ideal for:
- Residential and office users
- Utility companies
- Works as part of ZigBee-based Energy Management solution for business partners:
- Systems integrators
- Power utilities: solar power, wind power…etc.
- Green house developers/engineers
- Suppliers of Smart Energy devices in IHD, Load Control, and PCT
More Details >>
|
|
|
 |
Billion SG1100
ZigBee USB Dongle
The Billion SG1100 is a ZigBee-based USB dongle which instantly enables a wireless ZigBee connection for desktops or notebooks to monitor in-home electricity usage via Billion SG3010 ZigBee meter with plug and play convenience. This energy management solution can help them save money by reducing electric use during peak times.
The Billion SG1100 is targeted for residential and office users, utility companies, ZigBee network system integrator, and ZigBee end device manufacturers. Typical applications include cable replacement, automatic meter reading, home automation, and sensor applications over Home Area Networks (HAN).
- Fully IEEE 802.15.4 / ZigBee PRO compliant
- 16 channels in the 2.4GHz ISM band
- Integrated omni-directional antenna
- USB 1.1 interface
- AES-128 hardware supported encryption
- Radio output power from -43dbm to +3dbm
- RX Sensitivity -95dbm
- Up to 150M line-of-sight range
- Activity LED indicator
- Easy commissioning with single button
- Virtual COM port interface
- Windows 98 SE / 2000 / XP, Mac OS X, Linux driver supported
- USB powered
- Operating temperature from -40℃ to 85℃
More Details >>
|
|
|
 |
Billion SG3000
Compact LCD Smart Power Meter Series
The Billion SG3000 Compact LCD Smart Power Meter Series has a number of functions for electricity monitoring and estimation. Through the LCD display, the users can easily monitor the power consumption without any extra system or appliance. By using the touch button, it is able to show electricity information of home electrical appliances including Total Cumulative Kilowatt Hours, Interval Cumulative Kilowatt Hours, Electricity Cost, and Elapsed Time, etc. The Billion SG3000 series is available in four models according to different types of connector in order to meet users’ electrical environments.
The household users can measure the energy usage of an air conditioner by plugging it into the Billion SG3000-T1. They also can deploy the Billion SG3000-T3 or the Billion SG3000-T4 in a power cabinet in order to measure and monitor the electrical consumption throughout the entire home.
- Electricity usage data and other indicator information collection
- < 0.5% Wh accuracy
- Power surge protection
- Electricity cost calculation
- Compact size
- Four connector types: T1, T2, T3, and T4
- Target for:
- Residential and office users
- System integrator and planners
More Details >>
|
|
|
 |
Billion SG3010
Compact ZigBee Power Meter Series
The Billion SG3010 series can store the measured electricity data and wirelessly communicate this information to a PC, PDA, or mobile phone through an Internet-linked ZigBee VPN gateway - Billion SG6410. The Billion SG3010 series is available in four models according to different types of connector in order to meet users’ electrical environments. The household users can measure the energy usage of an air conditioner by plugging it into the Billion SG3010-T1. They also can deploy the Billion SG3010-T3 or the Billion SG3010-T4 in a power cabinet in order to measure and monitor the electrical consumption throughout the entire home.
- Fully complied with IEEE 802.15.4 ZigBee standard
- Electricity usage data and other indicator information collection
- < 0.5% Wh accuracy
- Power surge protection
- Electricity cost calculation
- Compact size
- Four connector types: T1, T2, T3, and T4
- Target for:
- Residential and office users
- Utility companies
- ZigBee network system integrator and planners
- ZigBee end device manufacturers
More Details >>
|
|
|
|
|
| |
|
| In-building EoC Solutions |
| |
 |
BiPAC 2310
EoC Head-End Unit
Extends a high-speed Internet connection through existing CATV network
connectivity over existing coaxial cables already in place. It provides fast reliable and cost effective distribution of broadband Internet access. With EoC, the cable operator and system integrator can extend internet access and services to every TV outlet over coaxial network, without further infrastructure rewiring. The EoC Head-End Unit acts as the bridge to combine the CATV and Ethernet signal for delivery over the standard coaxial in-building distribution system. It is designed to combine CATV signals with Ethernet digital data traffic to subscriber’s home through the existing coaxial network. The EoC Head–End Unit can meet IP interactive service requirement of MDU application and supports VOD service through rate limit.
- 200Mbps physical connection bandwidth
- 10/100 Ethernet x 2
- Coaxial cable interface 75 Ohm F connector
- AC power: 90-250VAC, 50/60Hz
- Ability to configure as a head-end master or a repeater
- Traffic control and isolation: VLAN/OVLAN
- 802.1D bridging protocol
- Up to 128 MACs table size for multiple devices
- Up to 31 direct CATV connection
- DES and 3DES encryption
- QoS with 8 level priority queues
- 802.1P traffic priority classification
- Bandwidth limitation for each End Point
- Power mask management
- SNMP and web network management protocol
- Configurable bandwidth from 2 to 30MHz
- Dimension: 270 x 250 x 78 mm
- Unit net weight: 2.3 kg
More Details >>
|
|
|
 |
BiPAC 2110
EoC End-Point Unit
Extends a high-speed Internet connection through existing CATV network
EoC End-Point Unit is designed to deliver a faster and more reliable stream of High-Definition quality entertainment seamlessly across your home. It enables you to set up your private home network using your existing Coax cabling. No additional network wiring is required. Simply connect it to an available coaxial outlet in the room to access your home’s coaxial wiring. The high speed will allow you to enjoy your Video on Demand services and Multimedia services with quality and speed. With EoC End-Point Unit, LAN environments can quickly be extended or changed to fit your networking needs without rewiring.
- Using exiting cable line to receive Internet signal
- Performs Coaxial cable to Ethernet conversion
- Ethernet output connects to a computer or supplies broadband input to a home networking router or gateway
- QoS supported
- Bandwidth management for service class differentiation
- Coaxial cable interface 75 Ohm F connector
- Dimension: 180 x 120 x 45 mm
- Unit net weight: 280 g
More Details >>
|
|
|
|
|
| |
|
| Smart Power Meter Series for Industrial & Commercial Energy Management |
| |
  |
Billion SG3150 Series
Pre-paid Smart Meter and Smart Card Reader
The Billion SG3150 Series is an intelligent prepayment system designed for the school dormitory, commercial and residential building. With its revenue-class accuracy, extended I/O flexibility and standard communication ability, the Billion SG3150 series is suitable for the applications such as the prepaid services, security integrations, and remote control managements. The built-in field control (LonTalks) and Internet access protocol (with router option) enable the Billion SG3150 to integrate with most of commercial Supervisory Control and Data Acquisition (SCADA) / Man Machine Interface (MMI) systems easily and economically.
- < 0.5% Wh accuracy with IEC-62053-21, IEC62053-22, and CNS14607 standard
- Time-of-Use (ToU) measurement with 4 tariff, configurable season and holiday settings
- Double RS-485 port for up-link and Card Reader
- Remote connect and disconnect
- 10 years certified life
- Built-in RTC with long life battery
- Internet management with router (RT option)
- Smart card prepayment and management with Card Reader (CR option) and Card Manager (SW options)
More Details >>
|
|
|
 |
Billion SG3140
Web-based Mini-SCADA
Web-based Mini-SCADA for Power Monitoring, Demand Control and Report Generation
- Widely used for power monitoring and control in factories and buildings
- Manages up to 16 units of power transducers
- Flexible field communication interfaces (Ethernet and RS485) for different power transducer connections
- Rich electricity parameters and power quality display for main and sub-feeder transducers
- Easy integrate with 3rd party supervisory control systems
- Remote power monitoring and control via intranet/Internet
- Electricity demand control with 16-channel load shedding
- Multi-tariff management with TOU (Time-of-Use rate)
- Built-in web server for remote monitoring, control and data download
- Automatic e-mail delivery of reports and alarm status
- Front USB host port for data backup and program installation
More Details >>
|
|
|
 |
Billion SG3130
Smart Power Meter
Ethernet-enabled Revenue Class Multifunctional Meter for Power Measurement, Power Quality Analysis and Power Usage Reporting
- Class 0.5 bi-directional energy and full power parameter measurement
- Block or rolling power demand measurement
- THD, individual harmonics and sag/swell power quality records
- Time-stamped data logging for alarm, sag and swell events
- Report generation for daily and monthly power usage including kWh, demand, peak THD, peak voltage, max/min Kw and others
- Communication interfaces: Ethernet, RS485
- Communication protocol: Modbus over TCP/IP for Ethernet, or Modbus for RS485
- Up to 4 re-transmission analog output channels for field integration
- 12 digital inputs for power system status monitoring
- 2 digital relays for kWh pulse or alarm output
- Automatic detection of voltage and current wiring
- Multi-language support
More Details >>
|
|
|
 |
Billion SG3120
Clip-on CT Smart Power Meter
Cost-effective Smart Transducer with Easy Installation and Large Data Storage Capacity
- Clip-on CT, simplified wiring especially for on-line installation
- Wide measurement range 10 (60) A, max to 200 A (24Ø mm) suitable for low voltage system
- Wh accuracy better than 0.5% (pf=1)
- Up to 10,000 load profile records with configurable recording period
- RS485 communication supporting Modbus protocol
- Wh pulse output for connection to standard meter testing equipment
More Details >>
|
|
|
 |
Billion SG3110
Compact Smart Power Meter
General Single Phase or Poly Phase Power Measurement
- Compact meter capable of true RMS energy and power parameter measurement
- Clip-on CT, simplified wiring for on-line installation
- RS485 communication supporting Modbus protocol
- Wh accuracy better than 0.5% (pf =1)
- Supports Lon Talks (optional)
- Wide range of measurements with various sized CT, up to 200 A (24Ø mm)
- LED pulse output
More Details >>
|
|
|
|
|
| |
|
| Smart Grid Accessories - Filters / Couplers / CTs |
| |
1. Filter Series |
|
SG-PLC-BF-016 (Single Phase)
SG-PLC-BF-017 (3-Phase)
|
Billion SG-PLC-BF Series
Smart Grid PLC Accessories - Single Phase and 3-Phase Blocking Filters
- Features:
- Protects PLC communications of outdoors interference signals and noise.
- Avoids the propagation of PLC signal into the neighbor’s houses.
Contact Billion for more detail >>
|
|
|
2. Coupler Series |
| |
Billion Smart Grid PLC coupling accessories are used to inject and adapt the telecommunication signal from the PLC equipment to the powerlines (MV and LV). There are two types:
a. CCU: Capacitive couplings injects signal by direct contact with the powerlines
b. ICU: Inductive couplings inject the signal by induction |
| |
a. Capacitive Coupling Unit
The Billion SG-LV-CCU series is a kind of Smart Grid accessories that enables the coupling of the data signal into powerline in a powerline communication system.
PLC signal is coupled into the powerline through two coupling capacitors (included in the device) that filter the 50/60 Hz power wave. Their outputs (marked as Line and Neutral in the device) have to be directly connected to the lines.
The rest of the coupling circuit includes a transformer that guarantees the galvanic isolation and makes the coupling of PLC signals of the data cable (from the PLC data device).
This integrated configuration (coupling capacitors and coupling circuit in the same device) optimizes impedance-matching behavior between power lines and PLC equipment, reducing losses and improving the available bandwidth for PLC communication.
Key Features
- Capacitive coupling unit for direct injection of the PLC signal into the powerline
- RoHS compliant
|
|
|
| |
b. Inductive Coupling Unit
The Billion SG-LV-ICU series is a kind of Smart Grid accessories that enables the coupling of the data signal into powerline in a powerline communication system.
A primary winding of a data signal cable (connected to a PLC data device) is coupled (using ferrite beads) into the power transmission cable that works as secondary winding.
Key Features
- Inductive coupling unit for injection of the PLC signal into the powerline
- RoHS compliant.
|
|
|
|
|
 |
Billion WCT Series
Window Type Current Transformers
High-accuracy Current Transformers for Smart Grid metering applications
- Features:
- Standard: CNS / IEC
- Frequency: 50 / 60Hz
More Details >>
|
|
|
 |
Billion CT Series
Epoxy Resin Molded Current Transformers
High-accuracy Current Transformers for Smart Grid metering applications
- Features:
- Small and slim size
- Easy to mount
- Low mechanical hum
- Meets standard such as TUV, VDE, CSA, and UL
- Standard: CNS / IEC
- Frequency: 50 / 60Hz
More Details >>
|
|
|
|
|
|
|
|
